Blowing away hot smoke when cutting materials, reduce the temperature, and cut more clean and smooth.
- Applicable with xTool D1 Pro/D1
[xTool M1 Users] Please choose the Air Assist Set for M1
- Cut Deeper & Faster
- Protect Laser Head
- 30 L/min output
- Clean Surface & Smooth Edge
Protect the laser lens - The xTool air assist device blows away acceptable debris and smoke generated by the laser head operation, protecting the laser head lens from contamination and extending the life of the laser head.
Guaranteed clean surface - It uses air to quickly reduce the temperature of the cut material surface, preventing distortion and discoloration due to high temperatures, ensuring smooth lines, complete patterns, and clean material surfaces.
Steady output power of 30L/min - Large and stable wind, with a steady output power of 30L/min, effectively removes smoke and ensures laser energy stability.
Low working noise - The noise of the air-assist unit when working is 40 decibels, which is lower than the working sound of the fan. The air assist unit can provide you with a quiet laser engraving environment.
- Air Pump
- Metal Nozzle
- 2 m Tube
- Fastening Screw
- Nozzle Connector
- Tube Clamp
- Air Pump Connector
- Light Shield for xTool D1
- Connection Tube
- Hex Key - 1.5 mm
- Hex Key - 2.5 mm
Notice for xTool D1 Users - To connect the D1 with the air pump, extra parts below are included for your D1. D1 PRO, no extra parts are needed.