Fume Extractor for DTF™ Powder Curing - 80W 106 CFM, 3 Stage Filters, 3 Speed
Needed to help extract powder vapor from heat stations and automated heater / Shaker.
ADDITIONAL ROOM VENTILATION IS HIGHLY SUGGESTED!
99.91% Purification Rate: The 80W DC motor of the fume extractor creates a powerful 106 CFM airflow to exhaust and purify the air.
3-Stage Filters: The solder fume extractor has 3 stage filters for high-quality filtration. A cotton filter, central HEPA filter, and an activated carbon filter absorb all smoke, dust, and harmful gases at work. The filter boasts of pleated design, with an expansion area of 2.1m2, significantly increasing filtration effectiveness.
3 Adjustable Speeds: The speed can be adjusted according to your work needs. Three stages speed from strong to weak can meet different working requirements.
Low Noise Motor: The powerful 80W DC brushless motor creates a max rotation speed of 5800 RPM. In addition, our engine features low noise.
Compact & Flexible: Dimensions are 11 x 11 x 19.7 inches. Metal latches very tightly closed the main filter bulk, completely sealed to prevent any leak. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement.
- 1 x Fume Extractor
- 1 x Smoking Pipe
- 1 x Smoking Cover
- 5 x Primary Filter Cotton
- 1 x HEPA Filter
- 1 x Activated Carbon Filter
- 1x Power Cord
- 1 x Manual