Want multi-color, multi-material prints without all the purge waste? The Bambu Lab H2C uses the Vortek hotend change system to swap whole hotends instead of purging one nozzle, so you get faster, cleaner multi-material parts. With the Laser Full Combo, the same machine also engraves and cuts with a 10W or 40W laser and cuts and draws with a blade module. Swing Design carries the Bambu Lab H2C, so you can order the combo that fits your work.
Bambu H2C with Laser & AMS 2 PRO Bundle Includes:
Both modules work on wood, rubber, metal sheet, leather, dark acrylic, and stone. The cutting module cuts paper, vinyl, and leather in a 300 × 285 mm area.
What makes the H2C different from the H2D and H2S?
The H2S has a single hotend and the H2D has two. The H2C adds the Vortek hotend change system on top of the dual hotend setup.
How many materials can the H2C print at once?
Vortek supports up to seven materials in one print with minimal purge waste. With extra AMS units, Bambu says it can handle up to 24 materials in a single print.
Does the H2C come with an AMS?
Yes. Every combo includes an AMS 2 Pro, and the Vortek Ultimate Bundle adds an AMS HT and a second AMS 2 Pro.
Does it work with the first-generation AMS or AMS Lite?
The first-gen AMS works but has no drying. AMS Lite isn't supported.
How hot can it print?
The nozzles reach 350°C, the heatbed 120°C, and the chamber heats actively to 65°C.
What filaments does the H2C support?
It supports PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, and PPS, plus carbon and glass fiber reinforced versions of PLA, PETG, PA, PET, PC, ABS, ASA, PPA, and PPS.
What's the difference between the 10W and 40W laser?
The 10W has a finer spot for detailed engraving at up to 400 mm/s. The 40W engraves at up to 1,000 mm/s and cuts up to 15 mm basswood.
Does the Laser Full Combo include the laser module?
Yes. You pick the 10W or 40W module when you order, and it ships in a separate package from the printer.
Can I add a laser to the standard H2C later?
Yes, with the H2 Laser Upgrade Kit, which uses an external air pump instead of the built-in one.
Is the laser safe to use?
The laser module is Class 4 and the enclosed system is Class 1. It has flame and temperature detection, a door sensor, a safety key, and an emergency stop button. Don't leave laser jobs unattended.
Why buy the Bambu Lab H2C from Swing Design?
Swing Design carries Bambu Lab printers, combos, and accessories, with knowledgeable help choosing the right setup for your work.
Where can I buy the Bambu Lab H2C?
You can order it from Swing Design at www.swingdesign.com
Painting intricate models is a thing of the past — the H2C brings your designs to life with six-color printing and a versatile seventh nozzle for support or an additional color. Bring your ideas to life in full color with minimal waste.
With the H2C, you can print up to seven different materials in a single run — no nozzle purging required. Combine multiple material properties in one seamless structure and take integrated design to a whole new level.
In traditional single-nozzle multi-material printing, purging is needed to clear leftover material between filament changes. Vortek changes that with an intelligent hotend-swapping system that replaces the entire hotend — delivering faster, cleaner prints with minimal waste.
The Vortek system works seamlessly with our highly reliable AMS (Automatic Material System), making the entire filament change process fully automatic — no need to manually load each filament into the toolhead.
Because only the hotend is swapped, the system can house up to six replaceable hotends without significantly reducing the build volume. That means more materials, more colors, and more possibilities — all in one print.
The Vortek system can store filament information in the hotend's memory, ensuring the correct filament is matched to each hotend. If you are printing with more than seven filament types, the system can calculate the optimal combination to minimize purge waste.
Unlike traditional tool changer printers that limit color count by the number of toolheads, the H2C supports up to 24 materials in a single print through parallel-connected AMS units. Its intelligent algorithm optimizes filament-to-hotend allocation to minimize purge waste while delivering outstanding multi-color and multi-material results.
Our high standards for reliability led us to move away from contact-based metal pins, which are prone to oxidation and unstable connections. We developed a contactless solution that ensures a stable, high-frequency connection — the foundation for precise temperature control and intelligent hotend sync.
Our industry-leading induction heating technology brings the nozzle to temperature in 8-sec, significantly reducing the preheating time for each material swap compared to traditional methods.
With its seamless enclosure and adaptive airflow system, the H2C maintains a stable chamber temperature for high-performance materials and filters the air to keep your workspace clean and safe.
Our inductive nozzle offset calibration is fully automated — no manual steps, no calibration plates, no extra setup. In just a few minutes, the H2C precisely calibrates nozzle offset to within 25 microns.*
The H2C's Vortek system lets you dedicate one of its six interchangeable hotends to specific filaments — a game-changer for valuable engineering materials. This ensures superior consistency and reliability across prints. Each hotend can even automatically store filament information, so the next time you load that material, it's instantly matched to the correct hotend.
The PMSM servo extruder delivers up to 10 kg of maximum extrusion force dramatically improves high-flowrate extrusion stability. Our proprietary servo architecture samples resistance and position at 20 kHz, actively detecting filament grinding and clogs in real time.
With its Vision Encoder, the H2C achieves a distance-independent motion accuracy of less than 50 μm—thinner than human hair. The system automatically compensates for any mechanical drift during calibration, ensuring consistent precision and peak performance over time.
The H2C leverages both the servo motor on the extruder and the high-resolution eddy current sensors on the nozzle to sense extrusion dynamics. This enables precise extrusion control and automatic calibration of Pressure Advance (PA) parameters for each filament, resulting in smoother surfaces and cleaner, sharper edges.
All seven nozzles in the system can reach a maximum temperature of 350 °C, allowing you to print with our entire filament lineup using any nozzle you choose.
The H2C's 65 °C actively heated chamber minimizes warping and deformation while enhancing layer adhesion for high-performance, high-temperature filaments.
The H2C's three-stage filtration system is essential for printing with engineering filaments. This powerful combination of a G3 pre-filter, an H12 HEPA filter, and a coconut shell activated carbon filter effectively minimizes the odors and harmful particulates often released by engineering materials.
The H2C is equipped with an array of 59 sensors* and a quad-camera computer vision system, all orchestrated by our proprietary neural algorithm. During printing, this system delivers intelligent, real-time diagnostics that can detect even the most subtle print anomalies as they happen. You don't have to be an expert to solve problems—your printer does the job for you.
The H2C features an AI-backed nozzle camera with macro lens. This intelligent monitoring system continuously tracks extrusion patterns, immediately detecting material accumulation, filament deviations, and extrusion failures.
The H2C's chamber is constructed entirely with flame-retardant material, providing robust, passive fire safety protection across the entire enclosure.
Before each print, the H2C's vision system runs a full pre-flight inspection — scanning the build surface for debris and confirming your print start settings. Everything is verified automatically, so every print starts perfectly.
The H2C utilizes a sophisticated closed-loop temperature control system for all heating components. By constantly cross-referencing real-time data from multiple sensors, the system ensures stable, precise thermal management, allowing the device to run efficiently and consistently within optimal temperature ranges.
The H2C offers convenient cloud connectivity for remote control from any device. For security-sensitive applications, it also provides full offline functionality, ensuring








































