xTool P3 CMYK Inkjet Printing Module Attachment

Add-ons

xTool P3 CMYK Inkjet Module: Full-Color Printing for the xTool P3 80W CO₂ Laser

The xTool P3 CMYK Inkjet Module adds full-color printing to the xTool P3, xTool's flagship 80W CO₂ laser cutter and engraver. You can print vibrant artwork across a 534.67 × 389 mm area and then laser cut or engrave it on the same machine. It's made for small businesses and serious makers who want to sell colorful signs, stickers, labels, gifts, and home décor without hand painting. You get it from Swing Design, xTool's largest dealer, with expert support behind every order at www.swingdesign.com.

Key Features

  • Print Then Cut in One Machine: The CMYK module turns the P3 into a print-and-cut workstation. Print your full-color design, then cut or engrave it with the P3's 80W CO₂ laser, with no manual alignment and no moving parts between machines. It's a faster way to make stickers, labels, signs, and layered wall art.
  • Large 534.67 × 389 mm Print Area: The P3 module gives you room for bigger signs, batch runs of stickers and labels, and larger décor pieces. That makes it a great fit for repeat orders and commercial production.
  • Upgraded Four-Color CMYK Printing: This module uses Cyan, Magenta, Yellow, and Black ink instead of the older three-color CMY setup. True black adds deeper shadows, richer color, and HD photo detail that helps finished products stand out.
  • Prints on a Wide Range of Materials: It prints directly on paper, cardstock, corrugated cardboard, basswood, and canvas bags. With the right primer, you can also print on acrylic, metal, stone, glass, and ceramic, which opens up more products and higher-value SKUs.
  • Simple Workflow in xTool Studio: The module mounts to the P3's belt with the included roller mounting plate and connects through the laser module. In xTool Studio, you set your design to the Inkjet Module, frame it, and print, with guided calibration the first time you use it.

What's Included

  • xTool P3 CMYK Inkjet Module
  • Ink Cartridge
  • Bottom Cap
  • Module Mounting Plate
  • Placing Board For Inkjet Test
  • Hex Key
  • Screw
  • Moisturizing Liquid
  • Grease
  • Inkjet Test Pad (With Holder)
  • Inkjet Test Pad (Spare)
  • Calibration Card
  • Placing Plate For Flexible Materials
  • Magnetic Patch
  • Masking Tape
  • User Manual

Specifications

Specification Details
Product Name xTool P3 CMYK Inkjet Module
Compatible Machine xTool P3 only
Print Technology CMYK inkjet
Max Print Area 534.67 × 389 mm
Ink Type Water-based dye ink
White Ink Not supported
Ink Cartridge Genuine 40 ml CMYK cartridge, up to 400 pages (shared with M2, X1, and P3 inkjet modules)
Conveyor Compatibility Not compatible (standalone use only)
Software xTool Studio (PC)
Mounting Roller mounting plate on the P3 belt, connected through the laser module
Operating Temperature 15–35°C (59–95°F)
Operating Humidity 40–60% RH
Warranty 12 months


Supported Materials

Material Direct Printing Primer or Coating
Paper and Cardstock Yes Not needed
Corrugated Cardboard Yes Not needed
Basswood and Wood Boards Yes Recommended
Canvas Bags and Fabric Yes Recommended
Acrylic No Required
Metal No Required
Stone and Rock No Required
Glass and Ceramic No Required


For the best color, print on white or light-colored materials. CMYK inkjet doesn't lay down a white base layer, so dark or black materials aren't a good fit for color printing.

How to Get Started

  1. If another module, like the 5W IR module, is connected to the P3's laser module, remove it first.
  2. Install the module mounting plate on the P3 belt, connect the inkjet module to the laser module, and plug in the cable.
  3. With the machine powered off, slide the ink cartridge in until it clicks.
  4. Install the slats, or raise your workpiece so the printing surface sits level with the slat working plane, so the P3 can detect the material. Hold materials down with masking tape or magnetic patches, not the P3's material clamps.
  5. Run calibration in xTool Studio the first time, then pick your material, import your artwork, set it to the Inkjet Module, frame it, and print.

Who It's For

  • Small businesses producing custom signs, stickers, labels, and packaging
  • Etsy and craft sellers who want more colorful, higher-value products
  • Shops handling batch production and repeat orders
  • Event and décor makers producing signage and layered wall art
  • xTool P3 owners who want to add color to the projects they already make

Frequently Asked Questions

Which machines is the xTool P3 CMYK Inkjet Module compatible with?
It works only with the xTool P3. The X1 and M2 each have their own inkjet module, but all three use the same CMYK ink cartridge.

What is the print area of the P3 CMYK Inkjet Module?
The max print area is 534.67 × 389 mm.

Can I use the CMYK module with the P3 conveyor feeder?
No. The CMYK inkjet module only supports standalone use, not the conveyor.

Can I print and then cut on the same machine?
Yes. You can print full-color designs and then laser cut or engrave them on the P3 with no manual alignment. It's ideal for stickers, labels, signs, and layered décor.

What kind of ink does it use?
It uses water-based dye ink in Cyan, Magenta, Yellow, and Black. It's not UV ink, and there's no white ink.

Which materials can I print on directly?
You can print directly on paper, cardstock, corrugated cardboard, basswood, and canvas bags. Acrylic, metal, stone, glass, and ceramic need a primer first.

Why do colors look lighter on some materials?
Since CMYK inkjet has no white base layer, colors look best on white or light materials. Absorbent surfaces like felt, untreated wood, and coarse burlap can also make colors look lighter or less vibrant.

Are the prints waterproof or washable?
No. The water-based ink can smudge or bleed if it gets wet, so washing printed items isn't recommended. A clear matte sealer spray, sold separately, can help protect finished pieces.

What software do I use?
The module runs in the PC version of xTool Studio. LightBurn and the mobile and iPad versions of XCS aren't supported.

How long does an ink cartridge last?
Each genuine 40 ml CMYK cartridge prints up to 400 pages. One cartridge is included, and replacements are sold separately.

How do I keep the module in good shape?
Recap the module after printing and keep the cover sponge slightly damp with the included moisturizing liquid or distilled water. Replace the inkjet test pad when it gets dirty, and grease the mounting plate rollers regularly with the included grease.

Why buy the xTool P3 CMYK Inkjet Module from Swing Design?
Swing Design is xTool's largest dealer, so you get genuine xTool products, fast shipping, and knowledgeable support to help you set up and get the most out of your P3.

Where can I buy the xTool P3 CMYK Inkjet Module?
You can order it from Swing Design at www.swingdesign.com.

Order the xTool P3 CMYK Inkjet Module Today

Add vibrant full-color printing to your xTool P3 and turn your 80W CO₂ laser into a print-and-cut production machine. Order the xTool P3 CMYK Inkjet Module from Swing Design, xTool's largest dealer, today.

Take Another Look