xTool X1 Mobile Work Stand: Rolling Laser Cart with Locking Casters, Pegboard Storage, and Conveyor Feeder Support
Give your xTool X1 laser cutter and engraver a sturdy, mobile home with the xTool X1 Mobile Work Stand. xTool designed this rolling stand exclusively for the X1, so it's sized to fit the machine and built to carry its weight. Smooth, quiet caster wheels let one person move the heavy X1 around the workshop. Four foot-operated brakes lock it firmly in place while you work. Built-in pegboard storage, customizable dividers, and extra shelf space keep your tools, parts, and materials organized right under your laser. Optional cantilevers support the xTool X1 Automatic Conveyor Feeder for continuous, large-format production. It's an essential X1 accessory for any home studio, small business, or makerspace, available now from Swing Design, xTool's largest dealer.
Key Features
- Made exclusively for the xTool X1: The stand is sized and engineered for the X1, giving it a stable, purpose-built base.
- Effortless one-person mobility: Smooth-rolling caster wheels make it easy to move the heavy X1 for cleaning, rearranging your space, or conveyor setup.
- Four locking brakes: Quick-toggle foot brakes on all four casters hold the stand steady while the laser runs.
- Silent, smooth-rolling wheels: The quiet casters roll over small obstacles like cords and floor seams.
- Expanded storage: A pegboard and DIY dividers let you customize storage for tools, accessories, and spare parts.
- Multi-layer shelving: Use the middle and bottom layers to store sheet materials like plywood, acrylic, and MDF. You can add your own boards for more storage.
- Conveyor feeder ready: Front and rear cantilevers support the X1 Automatic Conveyor Feeder, and they adjust left and right to line up with the conveyor rails.
- Quick, hassle-free assembly: Universal parts, precise mounting holes, and the included screwdriver and hex key make setup simple.
What's in the Box
- Columns, beams (A, B, and C), and board brackets
- Large and small boards
- Four caster wheels with brakes
- Front and rear cantilevers for the Automatic Conveyor Feeder
- M6 screws and self-tapping screws
- Phillips screwdriver and hex key
- Quick start guide and safety instructions
Approximate Dimensions
- Footprint: About 38 in (97 cm) long and 23 in (59 cm) deep
- Tabletop height: About 28 in (71 cm) from the floor to where the X1 sits
Customize Your Storage Shelves
The stand's middle and bottom layers can hold your own boards for more storage space. xTool recommends a 12 mm thick board in one of these sizes:
- 470 mm x 970 mm (about 18.5 in x 38.2 in)
- 580 mm x 860 mm (about 22.8 in x 33.9 in)
Why You Need a Mobile Stand for Your xTool X1
The xTool X1 is a large, heavy laser, and finding a sturdy table at the right height isn't always easy. The X1 Mobile Work Stand gives you a dedicated, stable surface at a comfortable working height. You can roll the whole setup wherever you need it. The storage space underneath keeps materials and tools within reach and frees up valuable floor and bench space. If you plan to use the Automatic Conveyor Feeder for batch production or long materials, the stand's cantilevers give the conveyor the support it needs.
Perfect For
- xTool X1 owners who want a dedicated, purpose-built laser stand
- Small businesses and Etsy sellers running batch production with the conveyor feeder
- Home studios and garages where you need to move equipment around
- Makerspaces, schools, and shared workshops that want organized, mobile setups
Frequently Asked Questions
Is the xTool X1 Mobile Work Stand compatible with other lasers?
No. xTool says the stand works only with the xTool X1.
Does the stand work with the X1 Automatic Conveyor Feeder?
Yes. Install the included front and rear cantilevers, then slide them left or right to line up with the conveyor rails and tighten the thumb screws.
Can I lock the wheels in place?
Yes. Each of the four casters has a foot brake. xTool recommends locking all four before you run the laser.
Is assembly difficult?
No. The stand uses universal parts and precise mounting holes. A Phillips screwdriver and hex key are included.
Can I add more storage shelves?
Yes. You can add your own 12 mm boards to the middle or bottom layer. The recommended sizes are 470 mm x 970 mm or 580 mm x 860 mm.
Can I move the stand with the X1 on it?
Yes. It's designed for easy one-person mobility on flat, level floors. Don't move it on slopes or rough, uneven surfaces.
Where should I keep the stand?
Use and store it in a dry area. Humid environments can cause rust.
Why buy the xTool X1 Mobile Work Stand from Swing Design?
Swing Design is xTool's largest dealer. That makes it a trusted source for genuine xTool machines, accessories, and expert product knowledge.
Upgrade Your xTool X1 Workspace Today
Turn your xTool X1 into a mobile, organized laser workstation. The xTool X1 Mobile Work Stand combines a stable, purpose-built base with locking casters, flexible storage, and conveyor feeder support. Order the xTool X1 Mobile Work Stand from Swing Design, xTool's largest dealer, today.