xTool Selected Air Compressor & Air Dryer - Ultimate Metal Cutting Solution

Unlock precision and efficiency in metal cutting with the xTool Selected Air Compressor & Air Dryer, engineered for seamless integration with the xTool MetalFab system. This compact yet powerful duo delivers burr-free cuts on 4mm stainless steel, 4mm aluminum, and 3mm brass at just 87 PSI, using the innovative xTool SaveGas™ nozzle. Say goodbye to costly nitrogen or argon gas tanks and embrace a cost-effective, eco-friendly solution that saves you up to $20,000 annually by using free ambient air.

Key Features

• HyperPure™ Filtration System: The air dryer’s triple-stage industrial-grade filters remove 99.999% of oil and rust and 99.99% of moisture, ensuring ultra-clean, dry air for superior cutting performance and extended equipment lifespan.

• Powerful Performance: Equipped with a 5.2 HP (2200W) motor and a 20L tank, the air compressor delivers a maximum pressure of 145 PSI (1.0 MPa) and 14.1 CFM airflow, recovering from 0 to 145 PSI in just 45 seconds for uninterrupted cutting.

• Space-Saving Design: At just 0.066 m³, this lightweight system (compressor: 18.11 x 20.87 x 10.63 in; dryer: 15.83 x 13.98 x 8.94 in) is more compact than industrial units and easy to move, perfect for small workshops.

• Cost Efficiency: Eliminate the need for expensive gas cylinders, which last only ~30 minutes at 1.2 MPa. This system uses electricity and ambient air, slashing operational costs significantly.

• Reliable Operation: Built for durability, it operates flawlessly in temperatures from -10°C to 40°C for over 2,400 hours, ensuring long-lasting performance in diverse environments.

• SaveGas™ Nozzle Compatibility: Achieve precise, burr-free cuts on thick metals with lower pressure (87 PSI) compared to traditional 174 PSI nitrogen cutting, though intricate patterns under 2.5mm may require standard nozzles and higher pressure (1.2 MPa).

Why Choose xTool Air Compressor & Air Dryer?

Designed for hobbyists and professionals, this system is a game-changer for laser cutting. The air compressor and dryer must be used together to prevent moisture, oil, or dust from damaging equipment or degrading cut quality. Unlike traditional compressors, the xTool solution offers unmatched portability and efficiency, with a unique heat exchange module and advanced filtration for cleaner, drier air.

• Perfect for MetalFab: Tailored for xTool’s MetalFab laser cutting system, ensuring optimal performance and compatibility.

• Eco-Friendly Cutting: Reduce your environmental footprint by eliminating gas cylinder refills and relying on sustainable compressed air.

• Enhanced Productivity: Fast pressure recovery and consistent airflow boost efficiency, letting you focus on creating flawless metalwork.

Technical Specifications

• Air Compressor:

  • Max Pressure: 145 PSI (1.0 MPa)

  • Airflow: 14.1 CFM (350 L/min)

  • Motor Power: 5.2 HP (2200W)

  • Tank Capacity: 20L

  • Dimensions: 18.11 x 20.87 x 10.63 in (460 x 530 x 270 mm)

  • Weight: 16 kg

  • Voltage: 200-240V, 10A

• Air Dryer:

  • Filtration: 3-stage (99.999% oil/dust removal, 99.99% moisture removal)

  • Dimensions: 15.83 x 13.98 x 8.94 in (402 x 355 x 227 mm)

  • Voltage: 100-240V, 3.45A (US), 380W

• Operating Conditions: -10°C to 40°C, up to 80% RH (wipe/replace protective lens every 8 hours in 90% RH).

Important Notes

• Mandatory Pairing: The air compressor and dryer must be used together to ensure clean, dry air and prevent equipment damage.

• Material Limitations: For thicker carbon steel, oxygen cutting is recommended; for intricate patterns or high-quality finishes, use standard nozzles with nitrogen/argon at over 1.2 MPa.

• Maintenance: Release residual air from the compressor tank when not in use and turn on the dryer before the compressor to maintain optimal performance.