xTool Air Purifier Go for the F2 Laser

Tool F2 Air Purifier Go: Pipe-Free, Backpack-Style Air Purifier for the xTool F2 Laser

The xTool F2 Air Purifier Go is a compact, backpack-style air purifier made only for the xTool F2 laser engraver. It mounts right on the back of the F2 with no exhaust hose, so you get 4-layer filtration wherever you take your laser, from craft fairs and pop-up events to your home studio. It weighs just 2.95 lbs, runs off the F2's power adapter, and starts and stops on its own with your laser. Get it from Swing Design, xTool's largest dealer.

Key Features

  • Backpack-Style, Pipe-Free Design: The Air Purifier Go mounts directly to the back of your xTool F2 and replaces its fan module, so there's no exhaust hose to route or window to vent through. At 150 × 150 × 250 mm and 1.34 kg (2.95 lbs), it stays compact and easy to carry with your F2.
  • 4-Layer Filtration: A pre-filter catches larger particles and helps the other filters last longer. Two HEPA filters trap fine dust, smoke, and airborne particles, while a modified carbon layer helps absorb odors, fumes, and VOCs.
  • Button-Free, Automatic Operation: It doesn't need its own switch or settings. The purifier starts when your F2 starts and keeps running a few seconds after it stops, so you never forget to turn it on.
  • Normal and Turbo Modes in xTool Studio: In xTool Studio, the recommended mode picks a setting based on your material, or you can choose Normal (25.45 m³/h) or Turbo (30.54 m³/h). You can also set post-processing purification time up to 600 seconds and turn on a filter life reminder.
  • Made for On-the-Go Customization: Built for craft fairs, market booths, pop-up events, and on-site personalization, it pairs with the portable F2 for a clean mobile setup. Powered through the F2 adapter with the included DC power splitter cable, it doesn't need a second outlet.

What's Included

  • xTool F2 Air Purifier Go
  • DC Power Splitter Cable
  • G4 Filter Cotton (3 Spare Sheets)
  • Screws
  • Washers
  • Sealing Ring
  • Quick Start Guide
  • Safety Instructions

Specifications

Specification Details
Product Name xTool F2 Air Purifier Go
Compatible Machine xTool F2 only
Design Backpack-style, pipe-free, mounts to the back of the F2
Filtration 4-layer (pre-filter, dual HEPA filters, modified carbon)
Air Volume Normal 25.45 m³/h, Turbo 30.54 m³/h
Wind Speed Normal 2.5 m/s, Turbo 3.0 m/s
Noise Level Below 63 dB
Power Powered by the xTool F2 power adapter through the DC power splitter cable
Controls Button-free, starts and stops with the F2, modes set in xTool Studio
Dimensions 150 × 150 × 250 mm
Weight 1.34 kg (2.95 lbs)
Operating Temperature 0–35°C (32–95°F)
Operating Humidity 40–80%
Certifications CE, FCC, RoHS
Warranty 12 months

How to Install

  1. Open the F2 cover and remove the F2 fan module.
  2. Install the included sealing ring.
  3. Connect the purifier to the F2 with the DC power splitter cable.
  4. Open the purifier's rear cover, take out the pre-installed filter, and mount the purifier to the F2 with the included screws and washers.
  5. Reinstall the filter, close the rear cover, and connect the DC power splitter cable to the F2 power adapter.

Filter Care

The main integrated filter is disposable, so don't wash or reuse it. For high-frequency daily use, xTool recommends replacing it about every two weeks, and the G4 filter cotton should be replaced sooner when you work with smoky materials like basswood. After a change, reset the filter time in xTool Studio. Replacement filters are sold separately as the Filter Kit for F2 Air Purifier Go.

Who It's For

  • xTool F2 owners who take their laser to craft fairs, markets, and pop-up events
  • Sellers doing on-site personalization and live engraving
  • Home crafters who want a compact purifier without an exhaust hose
  • Anyone who wants an F2 setup that's easy to pack and carry

Frequently Asked Questions

Which machines is the xTool Air Purifier Go compatible with?
It's only compatible with the xTool F2. It doesn't work with other xTool machines or with lasers from other brands.

Does the Air Purifier Go need an exhaust hose?
No. It's a pipe-free design that mounts directly to the back of the F2, so there's no hose to set up.

Does it have a battery?
No. It runs off the xTool F2 power adapter through the included DC power splitter cable, so it doesn't need its own outlet.

Do I have to turn it on manually?
No. There are no buttons. Once it's connected, it starts when the F2 starts and stops a few seconds after the F2 stops.

What filtration does it use?
It uses 4-layer filtration: a pre-filter, two HEPA filters, and a modified carbon layer that helps absorb odors, fumes, and VOCs.

How often should I replace the filter?
For high-frequency daily use, xTool recommends replacing the filter about every two weeks. Avoiding materials that produce heavy dust or strong odors helps it last longer.

How loud is the Air Purifier Go?
xTool keeps the noise below 63 dB.

Where can I use it?
It's designed for mobile customization at craft fairs, market booths, pop-ups, and on-site events. Since no purifier removes 100% of processing fumes, xTool recommends using it outdoors or in a well-ventilated space.

Why buy the xTool F2 Air Purifier Go from Swing Design?
Swing Design is xTool's largest dealer, so you get genuine xTool accessories, fast shipping, and knowledgeable support for your F2 setup.

Where can I buy the xTool F2 Air Purifier Go?
You can order it from Swing Design at www.swingdesign.com.

Order the xTool F2 Air Purifier Go Today

Take cleaner air anywhere your F2 goes with a lightweight, pipe-free purifier that runs on its own. Order the xTool F2 Air Purifier Go from Swing Design, xTool's largest dealer, today.

Take Another Look