xTool 14 Gauge (2mm) 24" 304 Stainless Steel Sheets for MetalFab - 5 Pieces
$299.99$325.00
$299.99
xTool 14 Gauge (2mm) 24" 304 Stainless Steel Sheets for MetalFab — 5 Pieces
These 304 stainless steel sheets are sized and tested for use with the xTool MetalFab. The 5-piece pack gives you ready-to-weld material in 14-gauge (2 mm) thickness and a 24" square size for practice, prototypes, and production parts.
Key Benefits
- Matched to MetalFab: Selected and tested for laser welding performance on the xTool MetalFab.
- 14-gauge (2 mm) thickness: 0.08 in (2 mm) provides a reliable starting point for many welding and fabrication jobs.
- 24" square sheets: 24 × 24 in (61 × 61 cm) offers usable area for multiple parts or larger single pieces.
- Pack of five pieces: Enough material for testing parameters, small runs, or multiple projects without mixing lots.
- 304 stainless steel: Corrosion-resistant grade suitable for laser welding workflows where mild steel is not preferred.
- xTool Selected material: Tested for processing performance (cut/engrave yield, parameter compatibility, and appearance consistency) so you can start with more reliable settings.
Setup Tips
- Confirm the MetalFab is set for stainless steel and the recommended assist gas or air settings for the job.
- Start with xTool’s tested parameters for 2 mm 304 stainless when available, then adjust for your specific joint type and finish.
- Keep sheets flat and clean before welding to maintain consistent results.
- Store unused sheets dry to avoid surface issues between sessions.
Specifications
| Item | Detail |
|---|---|
| Material | 304 stainless steel |
| Thickness | 14 gauge / 0.08 in (2 mm) |
| Sheet size | 24 × 24 in (61 × 61 cm) |
| Quantity | 5 pieces |
| Compatible machine | xTool MetalFab |
| Processing mode | Laser welding |
| Color | 304 stainless steel silver |
What’s Included
- 5 × 304 Stainless Steel Sheet (24 × 24 in / 61 × 61 cm, 14 gauge / 2 mm)
Who It’s For
Choose these sheets if you use an xTool MetalFab for laser welding and want consistent 304 stainless steel in 14-gauge (2 mm) thickness. Suitable for parameter testing, prototypes, and small production runs where corrosion resistance is needed.
FAQ
What machines are these sheets for?
They are listed as compatible with the xTool MetalFab for laser welding.
What is the exact size and thickness?
Each sheet is 24 × 24 in (61 × 61 cm) and 14 gauge / 0.08 in (2 mm) thick.
How many sheets are in the pack?
Five pieces.
Is this carbon steel?
No. These are 304 stainless steel sheets.