Prusa CORE One+ (Gen 2) 3D Printer with Filament & Build Sheet Pack

Please allow 1-2 weeks for shipping if selecting the Advanced Filtration Option)

Prusa CORE One+ (Gen 2) 3D Printer: Enclosed CoreXY With a 55 °C Heated Chamber

The Prusa CORE One+ (Gen 2) is the latest version of Prusa's enclosed CoreXY 3D printer. It's built for clean, reliable printing in everything from PLA and PETG to ABS, ASA, PC, and nylon. It has an actively heated 55 °C chamber, the Nextruder with quick-swap nozzles, and fully automatic calibration, so the assembled version can be printing about 10 minutes after you unbox it. Gen 2 adds GT1.5 belts, an integrated nozzle wiper, faster bed warmup, and a snap-on top panel. Shop the Prusa CORE One+ (Gen 2) at Swing Design.

Key Features

  • Enclosed CoreXY With Active Chamber Heating: The fully enclosed CoreXY frame moves a lightweight print head instead of the bed, for fast and stable printing. The chamber actively heats up to 55 °C, which reduces warping and cracking in ABS, ASA, PC, and PA. The top vents open and close on their own, so PLA and PETG print just as well inside.
  • What's New in Gen 2: GT1.5 belts reduce repeating surface patterns for smoother walls. An integrated silicone nozzle wiper gives you cleaner starts. A redesigned heatbed mount skips the heat-absorbing wait at bed temperatures up to 85 °C, so PLA and PETG prints start sooner, and the snap-on top panel comes off without tools.
  • Nextruder With Quick-Swap Nozzles: The direct-drive Nextruder has a 10:1 planetary gearbox, an all-metal hotend, and 360° part cooling. Nozzles from 0.25 to 0.8 mm swap in seconds without tools, and the hotend reaches 290 °C. For abrasive engineering filaments, Prusa recommends a hardened nozzle.
  • Fully Automatic Calibration: A load cell turns the nozzle into the probe, so first-layer calibration and mesh bed leveling happen automatically. Input Shaper, PhaseStepping, and 0.9° X/Y motors cut vibration and surface artifacts for clean, accurate prints at high speed.
  • Ready to Grow With You: Add the MMU3 for 5-filament printing or the INDX tool changer for up to 8 colors and materials with minimal waste. Optional upgrades include an in-chamber 1080p camera and the Advanced Filtration System. Prusa also plans an HT hotend that reaches 400 °C and is listed as coming soon.

Choose Your Bundle Configuration

This bundle is offered with two selectable accessory options:

  • Camera for CORE One+
    • With Camera: Includes the optional 1080p in-chamber camera with night vision functionality for remote print monitoring.
    • Without Camera: Includes the assembled CORE One+ base machine without the optional camera.
  • Advanced Filtration for CORE One+
    • With Advanced Filtration: Includes the optional Advanced Filtration System for printing materials such as ASA and other materials that can produce increased ultra-fine particles and fumes.
    • Without Advanced Filtration: Includes the assembled CORE One+ base machine without the optional Advanced Filtration System.

The camera connects directly to the motherboard using USB-C and requires an active Wi-Fi connection for operation. The Advanced Filtration System integrates into the printer enclosure and is particularly useful for materials such as ASA.

Bundle Includes:

  • Fully assembled CORE One+ (Gen 2) 3D printer
  • Fully enclosed CoreXY printer architecture
  • Optional Advanced Air Filtration
  • Optional 1080p In-Chamber Camera
  • Active temperature-controlled print chamber
  • Nextruder direct-drive print head
  • High-flow Prusa Nozzle brass CHT, 0.4 mm
  • 8 - 1kg rolls of assorted Prusa Pursament PLA filament
  • Bonus: 1 kg roll of Prusa Prusament PLA
  • Magnetic heatbed
  • 2 - CORE One Smooth PEI Print Sheets
  • CORE One Textured Powder-coated Print Sheet
  • CORE One Satin Powder-coated Print Sheet
  • CORE One PP powder-coated Print Sheet
  • CORE One PA Nylon Powder-coated Print Sheet
  • 3.5-inch graphic 65K-color display with touch control
  • Automatic first-layer calibration using the Load Cell sensor
  • Automatic mesh bed leveling
  • Input Shaper
  • Filament sensor system
  • Load Cell sensor
  • Bayonet-style spool holder
  • Automatic top vent operation
  • Integrated silicone nozzle wiper
  • Snap-on top panel
  • 240W power supply with Power Panic hardware
  • NFC receiver
  • Wi-Fi module delivered with the printer
  • Ethernet connectivity
  • USB connectivity
  • Standard printer power connection and required power hardware
  • USB drive with sample prints
  • 3D Printing Handbook
  • Free Access to Prusa Academy Courses
  • Free Basics of 3D Printing eBook
  • Alcohol-saturated maintenance wipes
  • Acupuncture needle for nozzle cleaning
  • U.S. Based Lifetime Product Support
  • 1 Year Prusa Warranty

Included Software

  • PrusaSlicer
  • EasyPrint
  • Prusa Connect
  • Prusa App
  • Printer firmware and firmware updates
  • 200+ factory-tuned material profiles in PrusaSlicer

PrusaSlicer, EasyPrint, Prusa Connect, the Prusa App, and firmware updates are included and available at no additional software cost.

Technical Specifications

Specification CORE One+ (Gen 2)
Printer Type Fully enclosed CoreXY 3D printer
Build Volume 250 × 220 × 270 mm / 9.8 × 8.6 × 10.6 in
Build Volume Capacity 14.9 L
Filament Diameter 1.75 mm
Layer Height 0.05–0.30 mm
Printer Dimensions 415 × 444 × 555 mm / 16.3 × 17.5 × 21.8 in
Printer Weight 22.5 kg
Maximum Nozzle Temperature 290 °C / 554 °F
Maximum Heatbed Temperature 120 °C / 248 °F
Maximum Chamber Temperature 55 °C / 131 °F
Nozzle High-flow Prusa Nozzle brass CHT, 0.4 mm
Extruder Nextruder direct drive
Drive System Nextruder planetary gear system, 10:1 gearbox
Cooling High-performance turbine, 360° cooling
Mainboard Custom 32-bit xBuddy electronics with STM32
Stepper Drivers Trinamic 2130
X/Y Stepper Motors Precise 0.9° stepper motors
Filament Path Aluminum heatsink, all-metal hotend
Display 3.5-inch graphic 65K-color screen
Touch Control Yes
First-Layer Calibration Fully automatic, Load Cell sensor
Bed Calibration Automatic mesh bed leveling
Input Shaper Yes
Print Surface Magnetic heatbed with removable steel sheets
Quick-Swap Nozzle Yes
Filament Sensors 2
Load Cell Sensor Yes
PSU 240W with Power Panic hardware
Connectivity Ethernet, Wi-Fi, USB
Wi-Fi NFC receiver and optional Wi-Fi module delivered with printer
Firmware Updates USB drive, Prusa Connect, Prusa Mobile App
Prusa Connect Support Yes
Camera Optional 1080p in-chamber camera
Advanced Filtration Optional add-on
Supported Materials PLA, PETG, Flex, PVA, PC, PP, CPE, PVB
Advanced Materials with Filtration ABS, ASA, HIPS, PA
Power Consumption PLA settings: 90W / ABS settings: 110W


Software & Connectivity

The CORE One+ can receive print files through USB, local network connectivity, Wi-Fi, or supported mobile and remote-management tools. The printer can also operate without an internet connection. PrusaSlicer provides more than 200 factory-tuned profiles for CORE One+, while EasyPrint provides browser-based slicing from a phone, tablet, or computer.

Prusa Connect supports remote printer monitoring and management, with the optional camera adding live video capability. The Prusa App provides printer control and Printables integration from iOS and Android devices.

Supported Materials

The CORE One+ (Gen 2) prints PLA, PETG, Flex, TPU, PVA, PC, PP, CPE, and PVB. With the optional Advanced Filtration System, you can also print ABS, ASA, HIPS, and PA. PrusaSlicer includes over 200 ready-to-use material profiles. Use a hardened nozzle for abrasive filaments like PCCF.

Who It's For

  • Makers and hobbyists who want a reliable printer that works right out of the box
  • Engineers and product designers printing functional parts in ABS, ASA, PC, and nylon
  • Small businesses and print farms that need consistent, repeatable results
  • Schools and makerspaces that want a safer, enclosed printer
  • MK4S and earlier CORE One owners looking for an enclosed upgrade

Frequently Asked Questions

What's new in the Prusa CORE One+ (Gen 2)?
Gen 2 adds GT1.5 belts for smoother surfaces, an integrated nozzle wiper for cleaner starts, a redesigned heatbed mount that skips the warmup wait at bed temperatures up to 85 °C, and a snap-on top panel that comes off without tools.

What's the build volume of the CORE One+ (Gen 2)?
It's 250 × 220 × 270 mm (9.8 × 8.6 × 10.6 in), or 14.9 liters.

Does the CORE One+ (Gen 2) have a heated chamber?
Yes. The chamber actively heats up to 55 °C, with automatic vents that open and close based on chamber temperature.

Is the CORE One+ (Gen 2) good for beginners?
Yes. The assembled version is factory calibrated and can be printing about 10 minutes after unboxing. The load cell handles first-layer calibration automatically.

Should I get the kit or the assembled version?
Both are the same printer, with the same performance and warranty. The kit is usually a weekend build if you enjoy putting things together. The assembled version is factory calibrated and ready to print.

Which materials need the enclosure?
ABS, ASA, PC, and PA benefit most from the heated chamber. PLA and PETG don't need it, but they print well inside thanks to the automatic ventilation.

Can I add multi-color printing later?
Yes. You can add the MMU3 for 5 filaments or the INDX tool changer for up to 8 colors and materials. Both are sold separately.

What software does it use?
It uses PrusaSlicer, which is free and runs on Windows, macOS, and Linux. You can also manage prints remotely with Prusa Connect, PrusaLink, and the Prusa app, with no subscription. The firmware is open source.

Can I upgrade my older CORE One or MK4S to Gen 2?
Yes. Prusa offers upgrade kits from the CORE One+ to Gen 2, and a direct MK4S to CORE One+ (Gen 2) conversion kit. An original CORE One needs two kits in a row, first to the CORE One+ and then to Gen 2.

How does it compare to the Prusa MK4S?
The CORE One+ (Gen 2) is an enclosed CoreXY printer with a heated chamber, so it handles engineering materials better and runs quieter than the open-frame MK4S. Both use the Nextruder and load cell calibration.

Where can I buy the Prusa CORE One+ (Gen 2) 3D Printer?
You can order it from Swing Design at www.swingdesign.com.

Order the Prusa CORE One+ (Gen 2) Today

Get enclosed CoreXY printing, a 55 °C heated chamber, and automatic calibration in one reliable, upgradeable 3D printer. Order the Prusa CORE One+ (Gen 2) 3D Printer from Swing Design today.

Take Another Look