Ecofreen A3+ R Direct to Film (DTF) Hot Peel Transfer Film Rolls 13" x 327 FT

DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results! Ecofreen Transfer Film does not require pre-treatment and it uses minimum 75% less DTG inks on to get good quality.

  • 2 Rolls - 13" x 109 Yd
  • The fabric has very slight hand feel touch.
  • The designed fabrics or printed shirts have a good wash characteristics.

      Application Process

      1. Print the image onto the matte side of the film in mirror mode
      2. Apply hot melt powder evenly and remove the excess powder
      3. Hover to bake the hot melt powder. (340°F, 5min), utilize a powder oven or use a Seismo shaker/dryer unit (320°F, 3-4 min).
      4. Transfer the image by heat press at 285°F for 10sec with medium pressure
      5. Hot Peel (remove the film gently)
      6. Heat press again at 285°F for 5sec with medium pressure to enhance softer hand feel

      NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink

      How to Print with Direct to Film Printers



          Related Items