More on the way, please allow 1-2 weeks for shipping
Ideal for Bambu Lab H3C owners who want higher volumetric speeds on standard 1.75 mm filaments without losing the detail of a 0.4 mm nozzle. The optimized melt zone reaches up to 48 mm³/s on PLA Matte and 40 mm³/s on PLA Basic.
The 0.4 mm High Flow Hotend works with most common 1.75 mm filaments. Check the full table on the manufacturer page for every material.
Not recommended for PLA-CF, PETG-CF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PET-CF, PPA-CF, PPS-CF. Not compatible with 2.85 mm TPU.
The 0.4 mm high-flow size gives the best everyday balance of speed and surface quality on the H3C. Use the single unit for a direct upgrade or the 4-pack when you run multiple tools or want spares ready.
Swing Design is the top Bambu Lab reseller and supplies genuine H3C high-flow hotends with lifetime support from our U.S.-based team. Personal and business financing is available at https://www.swingdesign.com/pages/financing-payment-plans so you can add the 0.4 mm high-flow option that cuts time on large PLA and PETG jobs.
Check which filament types work with each nozzle size. The columns below cover high-flow hotends. Confirm a filament is supported for your nozzle before you print.
| Filament | 0.4 mm | 0.6 mm | 0.8 mm |
|---|---|---|---|
| PLA Basic | ✓ | ✓ | ✓ |
| PLA Matte | ✓ | ✓ | ✓ |
| PLA Pure | ✓ | ✓ | ✓ |
| PLA Lite | ✓ | ✓ | ✓ |
| PLA Tough+ | ✓ | ✓ | ✓ |
| PETG Basic | ✓ | ✓ | ✓ |
| PETG Matte | ✓ | ✓ | ✓ |
| PETG HF | ✓ | ✓ | ✓ |
| ABS | ✓ | ✓ | ✓ |
| ASA | ✓ | ✓ | ✓ |
| PLA Silk+ | ✓ | Not recommended | Not recommended |
| PLA Silk Dual Color | ✓ | Not recommended | Not recommended |
| PLA Silk | ✓ | Not recommended | Not recommended |
| PLA-CF | Not recommended | ✓ | ✓ |
| PLA Marble | ✓ | ✓ | ✓ |
| PLA Metal | ✓ | ✓ | ✓ |
| PLA Sparkle | ✓ | ✓ | ✓ |
| PLA Galaxy | ✓ | ✓ | ✓ |
| PLA Glow | ✓ | ✓ | ✓ |
| PLA Wood | ✓ | ✓ | ✓ |
| PLA Translucent | ✓ | ✓ | ✓ |
| PETG Translucent | ✓ | ✓ | ✓ |
| PC | ✓ | ✓ | ✓ |
| PC FR | ✓ | ✓ | ✓ |
| PETG-CF | Not recommended | ✓ | ✓ |
| ABS-GF | ✓ | ✓ | ✓ |
| ASA-CF | Not recommended | ✓ | ✓ |
| PA6-CF | Not recommended | ✓ | ✓ |
| PA6-GF | Not recommended | ✓ | ✓ |
| PAHT-CF | Not recommended | ✓ | ✓ |
| PET-CF | Not recommended | ✓ | ✓ |
| PPA-CF | Not recommended | ✓ | ✓ |
| PPS-CF | Not recommended | ✓ | ✓ |
| PLA Aero | ✓ | Not recommended | Not recommended |
| ASA Aero | ✓ | Not recommended | Not recommended |
| TPU for AMS | ✓ | ✓ | ✓ |
| TPU 95A HF | ✓ | ✓ | ✓ |
| TPU 90A | Not recommended | Not recommended | Not recommended |
| TPU 85A | Not recommended | Not recommended | Not recommended |
| TPU 75A (2.85 mm) | ✗ | ✗ | ✗ |
| Generic TPU (2.85 mm) | ✗ | ✗ | ✗ |
| Support for PLA | ✓ | ✓ | ✓ |
| Support for PLA/PETG | ✓ | ✓ | ✓ |
| Support for ABS | ✓ | ✓ | ✓ |
| PVA | ✓ | ✓ | ✓ |
| Support for PA/PET | ✓ | ✓ | ✓ |








