BAi Hat & Cap Embroidery Starter Kit with Cap Hoop Frame

BAi Hat & Cap Embroidery Starter Kit with Cap Hoop Frame | Thread, Bobbins, Backing, Needles & Blanks for Mirror and Vision

Start structured hat and cap embroidery on your BAi by Richword multi-needle machine with the BAi Hat & Cap Embroidery Starter Kit with Cap Hoop Frame. This bundle includes a 15-color polyester thread set, pre-wound bobbins, cap backing (roll and pre-cut sheets), 3D embroidery foam, GROZ needles, a pocket embroidery accessory, and 12 OTTO blank caps so you can hoop, stitch, and finish production-ready hats without ordering supplies separately.

It is sized for BAi Mirror and Vision series machines and pairs the Cap Hoop Frame with the stabilizers and consumables those heads need for consistent tension on curved surfaces.

Key Features

• 15-Color Polyester Embroidery Thread Set — 15 spools of high-tenacity polyester for multi-color logos, fills, and production runs on structured caps.
• Pre-Wound Bobbins — 144 white plastic-sided (75D), 144 black plastic-sided (75D), and 144 white magnetic (70D) for multi-needle setups.
• Cap Backing — 1 roll (4" × 100 yd) plus 250 pre-cut sheets (4.5" × 7") for structured hats.
• 3D Embroidery Foam — 10 packs of 6" × 8" sheets (10 sheets per pack) for raised, puffy effects on caps.
• GROZ SAN1 Needles — Size 11 and Size 12 packs (2 of each) for cap embroidery on structured headwear.
• Pocket Embroidery Accessory — Supports embroidery on the sides and backs of structured caps.
• 12 OTTO Blank Caps — Ready-to-embroider structured blanks so you can start production immediately.
• Cap Hoop Frame Included — Holds structured caps with consistent tension for front, side, and back placements.
• BAi Mirror and Vision Compatible — Thread, backing, and frame matched to the tension and speed range of BAi multi-needle heads.

What’s Included

• 15-Color Polyester Embroidery Thread Set, 15 Spools
• 75D White Plastic-Sided Bobbins, 144 Pcs
• 75D Black Plastic-Sided Bobbins, 144 Pcs
• 70D White Magnetic Bobbins, 144 Pcs
• Cap Backing Roll, 4" × 100 Yd
• Pre-Cut Cap Backing, 4.5" × 7", 250 Pcs
• 10 × 3D Embroidery Foam Packs, 6" × 8", 10 Sheets Per Pack
• 2 × GROZ SAN1 Embroidery Needle Packs, Size 11
• 2 × GROZ SAN1 Embroidery Needle Packs, Size 12
• 1 × Pocket Embroidery Accessory
• 12 × OTTO Blank Caps
• Cap Hoop Frame

Specifications

Who This Kit Is For

• New BAi Mirror or Vision owners who want to start hat embroidery immediately
• Shops adding structured cap production and need thread, backing, foam, needles, and blanks in one order
• Operators who run 3D puff or multi-color logos on hats and need matching consumables
• Anyone restocking cap-specific supplies for multi-needle BAi machines

Setup Tips

1. Load the 15-color polyester spools on the BAi thread rack and confirm tension matches the machine’s recommended settings for caps.
2. Install the pre-wound bobbins and verify bobbin case tension before the first run.
3. Mount the Cap Hoop Frame, load an OTTO blank with the appropriate cap backing (roll or pre-cut sheet), and tension the hat evenly.
4. Use the pocket embroidery accessory for side or back placements when the design requires it.
5. Place 3D foam under designs that need raised effects and select the correct GROZ needle size for the fabric and density.
6. Run a small test design after loading to confirm registration and stitch quality on the curved surface.

FAQ

Which BAi machines is this kit for?
It is intended for BAi Mirror and Vision series multi-needle embroidery machines.

Does it include the Cap Hoop Frame?
Yes. The Cap Hoop Frame is included so you can hoop structured caps with consistent tension.

How much thread is included?
A 15-color polyester embroidery thread set with 15 spools.

What bobbins are included?
144 white plastic-sided (75D), 144 black plastic-sided (75D), and 144 white magnetic (70D).

Does it include stabilizers for hats?
Yes. It includes a 4" × 100 yd cap backing roll plus 250 sheets of 4.5" × 7" pre-cut cap backing.

Are needles and blank caps included?
Yes. GROZ SAN1 Size 11 and Size 12 needle packs (2 of each) and 12 OTTO blank caps are included.

What is the pocket embroidery accessory for?
It supports embroidery on the sides and backs of structured caps.

Why Buy From Swing Design

Available at Swing Design, the premier BAi dealer and largest U.S. source for BAi embroidery machines and accessories. Benefit from U.S.-based support, local service, and a team that specializes in BAi equipment so you get help when you need it.