xTool X1 30W Fiber Galvo Source Laser Expansion Kit
$1,799.00$1,999.00
$1,799.00
xTool X1 30W Fiber Galvo Source Laser Expansion Kit – High-Speed Metal Marking & Engraving for Your xTool X1
Make your xTool X1 a metal marking machine with the xTool X1 30W Fiber Galvo Source Expansion Laser Kit. This 30W infrared fiber laser source mounts on the back of the X1 through xTool's Laser Swap™ platform. It adds the 1064 nm wavelength that metals absorb best, so you can make sharp, durable, wear-resistant marks on stainless steel, aluminum, copper and coated metals at galvo speeds of up to 6,000 mm/s across a large 610 × 305 mm work area.
Important: The 30W Fiber Galvo Source provides only the laser source. It requires the xTool X1 20W Diode Galvo Module, which focuses and steers the fiber beam through the X1's flying-galvo optical path. Make sure your X1 has the 20W Diode Galvo Module installed, or add it to your order.
Swing Design is xTool's largest dealer, and we carry the 30W Fiber Galvo Source, the 20W Diode Galvo Module and the full X1 lineup, so you can build a multi-laser X1 that handles wood, acrylic and metal in one machine.
Key Features
- 30W fiber laser built for metal: The 1064 nm near-infrared wavelength creates clear gray or black marks on stainless steel, aluminum, copper and coated metals.
- Durable, long-lasting marks: Instead of burning the surface, the laser causes tiny areas of localized melting and oxidation. The marks resist wear and fading.
- Up to 6,000 mm/s galvo speed: Hybrid Motion™ syncs the X1's gantry with high-speed galvo mirrors for fast, precise marking.
- Large-format metal marking: A 610 × 305 mm processing area lets you mark big metal pieces or batches of tags in one run.
- Shallow engraving and embossing: Go beyond surface marking with shallow engraving. Use the included exhaust assembly for 3D embossing projects.
- Laser Swap™ platform: The source mounts on the rear of the X1 and connects with a single cable, so swapping sources is easy.
- Multi-source workflow: Mark metal with fiber and cut with the X1's 55W CO2 laser in the same project, without switching machines.
- xTool Studio software: Get guided workflows, material presets and automatic optical-path calibration on first use.
Specifications
What's Included:
- 30W Fiber Galvo Source
- Power Adapter (25 V, 8 A)
- Power Cable
- Exhaust Assembly for Embossing
- Thumb Screw
- Optical Window
- Steering Mirror
- Connection Cable
- Screw
- Screwdriver
- Installation Tool for Optical Window
- Calibration Card
- Laser Calibration Tool
- User Manual
What You Can Make with the 30W Fiber Laser
- Stainless steel and aluminum nameplates
- Serial numbers, QR codes and part IDs
- Logos and branding on metal products
- Dog tags, keychains and metal business cards
- Engraved tumblers, flasks and drinkware
- Jewelry, pendants and metal charms
- Tool marking and equipment labels
- Embossed metal designs with the included exhaust assembly
How to Install the 30W Fiber Galvo Source
- Make sure the 20W Diode Galvo Module is installed on your X1.
- Turn off the X1 and remove the rear cover.
- Remove the dustproof sticker from the source's laser output window.
- Line up the locating pins and mount the fiber source on the rear of the X1.
- Connect the connection and power cables.
- Open xTool Studio, connect the X1 and follow the on-screen optical-path calibration.
- Start marking metal.
Perfect For
- Custom metal gift and engraving businesses
- Industrial part marking and traceability
- Jewelry makers and Etsy sellers
- Promotional and corporate branding
- Makerspaces and fabrication shops
- X1 owners who want to add metal to their product catalog
Frequently Asked Questions
Do I need the 20W Diode Galvo Module to use the 30W Fiber Galvo Source?
Yes. The fiber source provides only the laser. It runs through the X1's flying-galvo optical path and the 20W Diode Galvo Module, which is required.
What metals can the 30W fiber laser mark?
It creates clear, durable gray or black marks on stainless steel, aluminum, copper and coated metals.
Can the 30W fiber laser cut metal or engrave deeply?
No. xTool says the 30W fiber source is best for metal marking and shallow engraving, not deep engraving or cutting metal. For deep engraving, color marking and more advanced metal work, look at the 60W MOPA Galvo Source.
Can it engrave wood, acrylic or other non-metals?
The fiber laser isn't meant for non-metal materials. Use the X1's 55W CO2 laser or the 20W diode for wood, acrylic and leather.
What's the difference between the 30W Fiber and the 60W MOPA?
Both use a 1064 nm wavelength. The 30W Fiber is a metal marking specialist. The 60W MOPA has adjustable pulse width, which adds color engraving on stainless steel, black marking on anodized aluminum and deeper metal engraving.
Can I run the fiber laser with the CO2 laser in one job?
Yes. The X1 supports multi-source jobs, so you can mark with the fiber laser and cut with the CO2 laser in a single setup.
Can I have more than one galvo source installed at once?
The X1 connects one external galvo source at a time, either fiber, MOPA or UV, through Laser Swap™.
Does the 30W Fiber Galvo Source work with other xTool machines?
No. It's designed only for the xTool X1.
Why buy the 30W Fiber Galvo Source from Swing Design?
Swing Design is xTool's largest dealer. We offer genuine xTool products, every X1 module and galvo source, and expert support to help you set up and grow your X1.
Add Metal to Your X1's Capabilities
The xTool X1 30W Fiber Galvo Source turns your X1 into a fast, large-format metal marking system, so one machine covers cutting, engraving and metal personalization. Order the xTool X1 30W Fiber Galvo Source Expansion Laser Kit from Swing Design, xTool's largest dealer, today.