xTool X1 All-in-One Laser Black Friday & Cyber Monday 2026 Sale

Key Features of the xTool X1 Up to five laser sources in one machine: Every X1 comes with a 55W CO2 laser. Add the 20W Diode Galvo Module for high-speed engraving, then expand with a 5W UV, 30W Fiber or 60W MOPA galvo source through Laser Swap™. You can cover wood, acrylic, leather, metal and glass without buying separate machines, and you can upgrade one step at a time as your business grows. Powerful 55W CO2 cutting: The built-in CO2 laser cuts up to 18 mm basswood and 20 mm acrylic in a single pass, with clean, consistent edges. It also handles leather, fabric, paper, rubber and other non-metals, so it's a true production cutter for signs, layered art and large-format projects. 6,000 mm/s Hybrid Motion™ galvo engraving: The X1's custom four-axis system pairs a large-format gantry with a high-speed galvo, keeping the two in sync to within 10 milliseconds and cutting sharp turns by 61%. You get galvo speed across the full 615 × 320 mm bed. Smart Seam Blending smooths the seams between engraving areas, so large designs come out as one continuous piece. Cut and engrave in one seamless workflow: Cut with the CO2 laser, then engrave fine details with the diode, UV, fiber or MOPA source in the same project, without repositioning your material. Built-in calibration, camera vision and multi-laser alignment keep every laser landing exactly where it should. ACS™ triple-camera automation: An 8 MP overview camera, a 12 MP close-up camera and a dot-laser ranging camera work with LiDAR ranging, autofocus and the AutoLift Base. Together they give you a true "Place & Go" workflow. The X1 finds your material, measures its height, adjusts the bed and aligns your design with less manual setup. AI-powered material settings and batch production: The camera scans your material, AI identifies it, and EasySet™ recommends settings from xTool's library of 1,700 materials and 110,000+ official presets. For bulk orders, the camera detects matching pieces and places the same design or different designs on each one automatically. Industrial build with multi-layer safety: A 4,000-ton die-cast UniCast Frame and vibration suppression deliver rigidity and lasting precision at high speed. Class 1 laser safety¹ protection, flame detection, temperature monitoring, cooling-system alerts and lid-open protection help keep your home, classroom or workshop safer. Choose Your X1 Configuration X1 Single CO2: The 55W CO2 laser for cutting and engraving wood, acrylic, leather and other non-metals. X1 CO2 + Diode Galvo: Adds the 20W Diode Galvo Module for 6,000 mm/s fine engraving, and it's the required foundation for UV, Fiber and MOPA expansion. X1 CO2 + Diode Galvo + UV: Adds glass and crystal inner engraving and ultra-fine marking on almost all materials. X1 CO2 + Diode Galvo + Fiber: Adds fast, high-contrast metal marking and engraving. X1 CO2 + Diode Galvo + MOPA: Adds advanced metal processing, including color engraving, deep engraving and embossing. What You Can Make with the xTool X1 Laser-cut wood signs, maps, home decor and layered art Acrylic signs, wall clocks, displays and cake toppers Leather patches, wallets and accessories High-detail photo engraving on wood and leather Color-engraved stainless steel tumblers and metal business cards Metal nameplates, serial numbers, logos and embossed medallions 3D crystal inner engraving and glass awards Custom jewelry, pendants and charms Wedding, event and corporate gifts in batches Frequently Asked Questions: What lasers does the xTool X1 support? The X1 supports five laser sources. The 55W CO2 comes standard, with an optional 20W Diode Galvo Module and 5W UV, 30W Fiber or 60W MOPA galvo sources. What's the difference between the X1 Single CO2 and the X1 CO2 + Diode Galvo? The difference is the 20W Diode Galvo Module. The Single CO2 is built for cutting. The CO2 + Diode Galvo adds 6,000 mm/s fine engraving and the ability to expand to UV, Fiber and MOPA. Can I upgrade my X1 later? Yes. You can start with the X1 Single CO2 and add the 20W Diode Galvo Module later. The Diode Galvo Module is required before adding UV, Fiber or MOPA sources. How thick can the X1 cut? The 55W CO2 laser cuts up to 18 mm basswood and 20 mm acrylic. How fast is the xTool X1? The CO2 laser runs up to 600 mm/s. The diode, UV, fiber and MOPA galvo sources run up to 6,000 mm/s. Can the X1 engrave metal and glass? Yes, with the right source. Add the 30W Fiber or 60W MOPA for metal, and the 5W UV for glass and crystal, including inner engraving. Can I use more than one galvo source at a time? The X1 connects one external galvo source at a time, either UV, Fiber or MOPA, alongside the CO2 laser and the 20W diode. Does the X1 work with a rotary? Yes. The X1 is compatible with the xTool RA3, RA2 and RA2 Pro, with a max rotary diameter of 110 mm. Is the xTool X1 safe to use at home? The X1 is designed with Class 1 laser safety¹ and multi-layer monitoring, including flame detection, temperature monitoring and lid-open protection. Some configurations, like the UV source during optical alignment or the Conveyor Feeder, change the laser class (see note below). How does the X1 compare to the xTool P3 and F Ultra Series? The X1 is all about all-in-one versatility and expandability. The P3 focuses on large-format, heavy-duty non-metal cutting. The F Ultra Series is built for ultra-high speed, specialized metal and glass processing, and portability. Why buy the xTool X1 from Swing Design? Swing Design is xTool's largest dealer. We offer genuine xTool products, every X1 configuration and accessory, and expert support to help you choose, set up and grow your X1.