Unisub Sublimation Yard Sign Blanks - Rectangle / 7.75" x 15.83" - 4776

Unisub’s exterior sign products are made with a UV resistant coating and are perfect for outdoor marking, lawn décor, advertisements, plant identification signs and more. Choose from a variety of pack sizes for wholesale pricing. Heat transfer vinyl (HTV) can also be applied to these sublimation blanks. 

Download free sublimation template

Specification

  • SIZE 7.75" x 15.83" (196.85 mm x 402.08 mm)
  • SUBSTRATE : Aluminum
  • THICKNESS: 0.045" / 1.14 mm
  • FINISH : Gloss
  • COATING: White

Volume Pricing 

  • 1 Blank                            $11.34 / Blank
  • Pack of 10 Blanks             $10.89 / Blank
  • Pack of 20 Blanks           $10.65 / Blank
  • Pack of 40 Blanks           $10.32 / Blank

How to Sublimate Garden Stake

Materials needed

  • Unisub Aluminum Garden Stake Blank
  • Sublimation Printer
  • Heat Press
  • Heat Tape
  • Cleaning Cloth
  • Blowout Paper
  • Printed Transfer
  • Printing RIP Software
  • Heat Gloves
  • Scissors
  • All-Purpose Cleaning Fluid

Step-By-Step Guide

  1. Turn on your heat press. Set the temperature to 400°F / 205°C (temperatures based on prints made with small desktop sublimation printers). Strong pressure is recommended. (settings may vary based on equipment). Add a sheet of protection paper (blowout paper) on the bottom plate of the heat press.
  2. Clean the surface with all-purpose cleaner, a cloth, and compressed air. Put your blank gently face-down on the printed transfer. Line up and center the garden stakes on the printed transfer. Add heat tape on both sides of the item.
  3. Add everything in the center of the bottom plate of the heat press. Be sure that your printed transfer is face-down on the bottom plate. Add a layer of blowout paper or Endura on top of your printed transfer. Set the correct temperature & time (see below). Close the heat press so the sublimation process starts.
  4. When the sublimation process stops, remove immediately the transfer paper and allow the product to cool down. li>

    Attention: the item will be hot, so wear protective heat gloves. Increase time if pressing more than one clock at a time.

Product

Temperature

Time (min)

Aluminum Garden Stakes

400°F/205°C

1:30

*The stated sublimation times are only valid for prints made on small desktop sublimation printers.



      Related Items