{"product_id":"flux-beamo-ii-auto-feeder-extension","title":"FLUX Beamo II Auto Feeder Extension","description":"\u003ch2 dir=\"auto\"\u003eFLUX Beamo II Auto Feeder Extension\u003c\/h2\u003e\n\u003cp dir=\"auto\"\u003eShop the official \u003cstrong\u003eFLUX Beamo II Auto Feeder\u003c\/strong\u003e and stop cutting long jobs down to fit the bed. This motorized feeder add-on pulls material through Beamo II with aligned, repeatable motion so you can engrave and cut longer boards, signs, moldings, leather strips, and production runs instead of tiling every design by hand.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eOfficial FLUX copy is simple: seamless handling, precise alignment, and continuous production. In practice, it turns a compact 360 × 240 mm desktop cutter into a pass-through workstation for material up to \u003cstrong\u003e16.14\" wide\u003c\/strong\u003e and \u003cstrong\u003e39.37\" long\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eRequired:\u003c\/strong\u003e the \u003cstrong\u003eBeamo II Extension Base Riser\u003c\/strong\u003e. The Auto Feeder will not work correctly without it. Pair both when you order from Swing Design.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eWhy add the Auto Feeder\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThe standard Beamo II bed is built for compact blanks. Long plaques, ruler stock, cabinet strips, bookmarks, and batch gift runs usually mean extra cuts, extra alignment, and extra waste. The Auto Feeder feeds the sheet, holds the edge, and advances the work so Beam Studio can process a longer path in one setup.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eUse it for:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eLong wood and acrylic signs\u003c\/li\u003e\n\u003cli\u003eMolding, slats, and trim pieces\u003c\/li\u003e\n\u003cli\u003eLeather belts, straps, and nameplates\u003c\/li\u003e\n\u003cli\u003eCardboard, paper, and fabric runs\u003c\/li\u003e\n\u003cli\u003eRepeat production instead of one-off placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eOfficial \u003cstrong\u003ebeamo II Auto Feeder\u003c\/strong\u003e add-on\u003c\/li\u003e\n\u003cli\u003eMotorized feed with rail guidance and edge rollers for straight travel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16.14\" (410 mm)\u003c\/strong\u003e max material width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13.39\" (340 mm)\u003c\/strong\u003e max process-area width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e39.37\" (1,000 mm)\u003c\/strong\u003e max process-area length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.54\" (90 mm)\u003c\/strong\u003e max material thickness\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.79\" (20 mm)\u003c\/strong\u003e max clamp thickness\u003c\/li\u003e\n\u003cli\u003eHeight levels from \u003cstrong\u003e3 mm to 92 mm\u003c\/strong\u003e so the rails match stock thickness\u003c\/li\u003e\n\u003cli\u003eWorks with Beam Studio’s Auto Feeder mode—enter material length, preview the border, then run\u003c\/li\u003e\n\u003cli\u003eSold and supported at \u003cstrong\u003eSwingDesign.com\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eTechnical specifications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOfficial name\u003c\/td\u003e\n\u003ctd\u003ebeamo II Auto Feeder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eFLUX Beamo II only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired add-on\u003c\/td\u003e\n\u003ctd\u003ebeamo II Extension Base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax material width\u003c\/td\u003e\n\u003ctd\u003e16.14\" (410 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax process area width\u003c\/td\u003e\n\u003ctd\u003e13.39\" (340 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax process area length\u003c\/td\u003e\n\u003ctd\u003e39.37\" (1,000 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax material thickness\u003c\/td\u003e\n\u003ctd\u003e3.54\" (90 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax clamp thickness\u003c\/td\u003e\n\u003ctd\u003e0.79\" (20 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum practical thickness\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoftware\u003c\/td\u003e\n\u003ctd\u003eBeam Studio Auto Feeder mode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp dir=\"auto\"\u003eRail height chart from FLUX’s Beamo II Auto Feeder guide:\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eA\u003c\/strong\u003e 3–12 mm · \u003cstrong\u003eB\u003c\/strong\u003e 12–22 mm · \u003cstrong\u003eC\u003c\/strong\u003e 22–32 mm · \u003cstrong\u003eD\u003c\/strong\u003e 32–42 mm · \u003cstrong\u003eE\u003c\/strong\u003e 42–52 mm · \u003cstrong\u003eF\u003c\/strong\u003e 52–62 mm · \u003cstrong\u003eG\u003c\/strong\u003e 62–72 mm · \u003cstrong\u003eH\u003c\/strong\u003e 72–82 mm · \u003cstrong\u003eI\u003c\/strong\u003e 82–92 mm · \u003cstrong\u003eJ\u003c\/strong\u003e 92 mm max\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eWhat’s in the box\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eFLUX’s Beamo II Auto Feeder kit includes the feeder unit, ball-wheel rails, rail connectors and fixing beam, belt and belt clamps, edge-guide rollers and platforms, rail lifting bases, magnets and L-brackets, adapter and cable, mounting hardware, wrenches, and spare white ball bearings.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eCompatibility notes\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eThis feeder is \u003cstrong\u003eBeamo II only\u003c\/strong\u003e. It does not fit original beamo, Beambox, Beambox Pro, Beambox II, HEXA, or Ador.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eYou also need:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLUX Beamo II\u003c\/strong\u003e laser\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeamo II Extension Base\u003c\/strong\u003e (pass-through \/ riser base)\u003c\/li\u003e\n\u003cli\u003eBeam Studio with Auto Feeder enabled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eThe Extension Base is sold separately. Install that first, then the feeder. Some regions list an extra-long rail package beyond 1,000 mm; the official US spec for this add-on is \u003cstrong\u003e39.37\" \/ 1,000 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eSafety note\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eBeamo II is a Class 1 enclosed laser in normal use. \u003cstrong\u003eAuto Feeder operation is Class 4\u003c\/strong\u003e because the front and rear covers are open for pass-through. Use the machine’s safety-key workflow, keep the work area controlled, and follow FLUX’s Auto Feeder setup guide before the first run.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eThin stock from about 3–7 mm may sit too low for the autofocus probe to touch. Pad the material so the probe can read height, then clamp and test feed before you start the job.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eBest for\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eShops and makers who already own Beamo II and need longer throughput: personalized signage, batch engraving, architectural pieces, classroom production, and any job that is wider or longer than the standard enclosed bed.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eGood to know\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eMeasure thickness, set the matching rail height, square the edge guides, and use Beam Studio’s border preview before firing. Keep material flat on the rollers. If a sheet is too long for the first rail setup, FLUX’s guide covers adding an extra rail section with connectors.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eReady for longer Beamo II jobs?\u003c\/strong\u003e Add the Riser Extension Base at the same time if you do not already have it.\u003c\/p\u003e","brand":"FLUX","offers":[{"title":"Default Title","offer_id":43925003206718,"sku":"FLUX-BEAMO-II-AUTOFEEDER","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0224\/5205\/files\/flux-beamo-ii-auto-feeder-extension-swing-design-7957706.png?v=1789449370","url":"https:\/\/www.swingdesign.com\/products\/flux-beamo-ii-auto-feeder-extension","provider":"Swing Design","version":"1.0","type":"link"}