{"product_id":"flux-beamo-ii-30w-laser-tube-replacement","title":"FLUX Beamo II 30W CO2 Laser Tube Replacement","description":"\u003ch2 dir=\"auto\"\u003eFLUX Beamo II 30W CO2 Laser Tube Replacement\u003c\/h2\u003e\n\u003cp dir=\"auto\"\u003eRestore cutting power on your FLUX Beamo II with the official \u003cstrong\u003eFLUX Replacement 30W Laser Tube for beamo II\u003c\/strong\u003e. This is the water-cooled \u003cstrong\u003e30W CO2 glass tube\u003c\/strong\u003e the machine was built around. When output drops, cuts need extra passes, or engraving looks weak, a worn tube is usually the cause—not the software.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eUse this SKU only on \u003cstrong\u003eBeamo II\u003c\/strong\u003e. Original beamo uses a different 30W replacement tube. Do not mix them.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eWhy replace the tube\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eCO2 tubes are consumables. Hours at high power, poor cooling, or age reduce wattage even if the machine still “fires.” Typical signs:\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eWood or acrylic that used to cut in one pass now needs two or three\u003c\/li\u003e\n\u003cli\u003eEngraving looks pale at settings that used to be dark\u003c\/li\u003e\n\u003cli\u003ePower feels inconsistent across the bed\u003c\/li\u003e\n\u003cli\u003eThe tube is old, stored dry for a long time, or physically damaged\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"auto\"\u003eA correct OEM tube brings Beamo II back to its rated \u003cstrong\u003e30W CO2\u003c\/strong\u003e performance: up to \u003cstrong\u003e1,000 DPI\u003c\/strong\u003e, \u003cstrong\u003e750 mm\/s\u003c\/strong\u003e head speed, and the standard \u003cstrong\u003e14.17\" × 9.45\" (360 × 240 mm)\u003c\/strong\u003e work area on wood, acrylic, leather, paper, and similar non-metals.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eKey features\u003c\/h3\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eOfficial \u003cstrong\u003eFLUX Replacement 30W Laser Tube for beamo II\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W\u003c\/strong\u003e DC CO2 glass tube, \u003cstrong\u003e10.6 μm \/ 10,640 nm\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater-cooled inlet and outlet\u003c\/li\u003e\n\u003cli\u003eAnode \/ cathode wiring with high-voltage and low-voltage connections\u003c\/li\u003e\n\u003cli\u003eBuilt to FLUX Beamo II fitment—not a generic 30W glass tube\u003c\/li\u003e\n\u003cli\u003eRestores cut and engrave performance on the stock CO2 path\u003c\/li\u003e\n\u003cli\u003eSeparate from the original \u003cstrong\u003ebeamo\u003c\/strong\u003e 30W tube and from Beambox \/ HEXA tubes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"auto\"\u003eTechnical specifications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003ctable dir=\"auto\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOfficial name\u003c\/td\u003e\n\u003ctd\u003eFLUX Replacement 30W Laser Tube for beamo II\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eFLUX Beamo II only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLaser type\u003c\/td\u003e\n\u003ctd\u003eCO2 glass tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e30W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWavelength\u003c\/td\u003e\n\u003ctd\u003e10.6 μm (10,640 nm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eWater-cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine work area (CO2)\u003c\/td\u003e\n\u003ctd\u003e14.17\" × 9.45\" (360 × 240 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachine max speed\u003c\/td\u003e\n\u003ctd\u003e750 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003eUp to 1,000 DPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNot compatible with\u003c\/td\u003e\n\u003ctd\u003eOriginal beamo, Beambox, Beambox Pro, Beambox II, HEXA, Ador\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 dir=\"auto\"\u003eCompatibility notes\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eBuy this tube if your machine is \u003cstrong\u003eBeamo II\u003c\/strong\u003e.\u003cbr\u003eBuy the \u003cstrong\u003eFLUX Replacement 30W Laser Tube for beamo\u003c\/strong\u003e if your machine is first-generation beamo.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eWattage must match the machine. A 40W or 55W tube from another FLUX model will not fit or run correctly in Beamo II.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eAfter you install\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003ePower the machine off and unplug it before you open the rear cover. Follow FLUX’s official tube-replacement steps for cooling hoses, holders, and wiring. Refill the cooling system with the recommended water. Then check and adjust the optical path—a new tube almost always needs alignment even if the old one was close.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eIf you are not comfortable working around a high-voltage CO2 tube, contact support before you start.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eGood to know\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eLaser tubes have a shorter warranty than the Beamo II body. FLUX’s current Beamo II policy lists the \u003cstrong\u003e30W laser tube\u003c\/strong\u003e separately from the 12-month machine warranty. Treat the tube as a wear part and keep the machine cooled and aligned to get full life from the replacement.\u003c\/p\u003e\n\u003ch3 dir=\"auto\"\u003eWhy buy from Swing Design\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eAuthorized FLUX dealer with US stock, real support after checkout, and the matching Beamo II parts in one place—tubes, honeycomb, hoses, and add-ons. Not sure if you need the Beamo II tube or the original beamo tube? Contact Swing Design with your model before you order.\u003c\/p\u003e","brand":"FLUX","offers":[{"title":"Default Title","offer_id":43925057011774,"sku":"FLUX-BEAMO-II-REPLACEMENT-TUBE","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0224\/5205\/files\/FLUX-CO2-Laser-Tube_65c7f690-00e0-4e24-8782-139a245075e6.png?v=1789404066","url":"https:\/\/www.swingdesign.com\/products\/flux-beamo-ii-30w-laser-tube-replacement","provider":"Swing Design","version":"1.0","type":"link"}