{"product_id":"eufymake-e1-uv-printer-exhaust-fan-kit","title":"eufyMake E1 UV Printer Exhaust Fan Kit","description":"\u003ch3 dir=\"auto\"\u003eeufyMake Exhaust Fan Kit — High-Flow Odor Removal for the EufyMake E1 UV Printer\u003c\/h3\u003e\n\u003cp dir=\"auto\"\u003eVent UV printing odor outside instead of filtering it. The eufyMake Exhaust Fan Kit is the purpose-built exhaust system for the E1. It pulls air from the printer through a custom duct, then sends fumes out a window or exterior vent so you can print longer, including with the standard bed open, without filling the room with TVOCs.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eShop the eufyMake Exhaust Fan Kit and the full E1 accessory lineup at Swing Design.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eWhy the Exhaust Fan Kit Exists\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eThe E1’s built-in filter helps in a closed mini-bed setup, but open-bed and longer jobs still release noticeable odor. A generic shop fan or DIY hose can be too strong and disturb ink. This kit uses a custom air duct and precisely balanced pressure so odor leaves the room quickly without causing ink drift or hurting print quality.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eKey Benefits\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-flow exhaust, 2x faster odor removal\u003c\/strong\u003e: Oversized centrifugal fan clears the print area even during open-bed jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise air pressure\u003c\/strong\u003e: Tuned so exhaust is strong enough to vent fumes without disturbing the print zone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuiet enough for a studio\u003c\/strong\u003e: As low as 40 dB in Silent mode, about as quiet as a library.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree one-tap modes\u003c\/strong\u003e: Silent, Standard, and Strong to match the job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks with open printing\u003c\/strong\u003e: Effective when the side door is open on the standard bed or roll-to-film setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible placement\u003c\/strong\u003e: Compact unit for desktop use or wall mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy setup\u003c\/strong\u003e: Snap-on duct, 5-second quick release, and dual venting options (direct outside or window kit).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"auto\"\u003eHow It Connects\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eThe kit uses an exclusive exhaust duct that attaches to the E1. Route the included 2-inch hose to a window or exterior vent. A window adapter is included so you do not have to leave the window wide open. Airflow is balanced to protect print quality while moving odor out of the room.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eSpecifications\u003c\/h4\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eFan speed: 4,300 RPM, 3 modes (Silent \/ Standard \/ Strong)\u003c\/li\u003e\n\u003cli\u003eAir pressure: 480 Pa\u003c\/li\u003e\n\u003cli\u003eNoise: as low as 40 dB in Silent mode\u003c\/li\u003e\n\u003cli\u003ePower: 48 W\u003c\/li\u003e\n\u003cli\u003eDimensions: 215 × 180 × 198 mm (8.46 × 7.09 × 7.80 in)\u003c\/li\u003e\n\u003cli\u003eWeight: 1.45 kg (3.2 lb)\u003c\/li\u003e\n\u003cli\u003eHose diameter: 5.08 cm \/ 2 in\u003c\/li\u003e\n\u003cli\u003eHose lengths included: 1 m (3.28 ft) and 3 m (9.84 ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 dir=\"auto\"\u003eBundle Includes:\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eExhaust fan, power adapter, exhaust duct, exhaust duct cover, 1 m (3.28 ft) 2-inch hose with connector, 3 m (9.84 ft) 2-inch hose with connector and 2-inch to 5.62-inch window adapter, wall mount kit (2 brackets, 4 screws, hex key), and Quick Start Guide.\u003c\/p\u003e\n\u003ch4 dir=\"auto\"\u003eWho It’s For\u003c\/h4\u003e\n\u003cp dir=\"auto\"\u003eChoose the Exhaust Fan Kit if you print near a window or have access to an exterior vent. It is the simpler, more affordable way to get odor out of the room. Choose the Purifier P1 instead if you print in enclosed spaces, at events, or anywhere you cannot vent outside.\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003eAvailable now at Swing Design—your source for genuine eufyMake E1 UV printer accessories, bundles, and expert support.\u003c\/p\u003e","brand":"eufyMake","offers":[{"title":"Default Title","offer_id":43217634623550,"sku":"EM-E1-EXHUST-FAN","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0224\/5205\/files\/Eufymake-E1-Exhaust-Fan-Kit.png?v=1787259449","url":"https:\/\/www.swingdesign.com\/products\/eufymake-e1-uv-printer-exhaust-fan-kit","provider":"Swing Design","version":"1.0","type":"link"}